Applicable to all types of precast plants and roads, bridges, water, ports, terminals and other industrial and civil construction sectors mix dry hard concrete, plastic concrete, flowing concrete, lightweight aggregate concrete and various mortar. This series can be used as stand-alone products in addition to the use of outer concrete mixer, also as a mixing console and PL series batching unit synthetic concrete mixing station. Is currently the most commonly used type of concrete mixer stir because of its Ω-shaped tank and twin shaft mixer form, so that it can form two stirring center concrete mixer, and the formation of vortex mixing zone portable concrete mixer at the junction, which can stir out of high-quality concrete with a shorter period of time. Concrete mixer agitating blades blade inclination to install a concrete mixer to be consistent, can not hold against. 2 a stirring blade angle is too large or too small will affect the yield by stirring, so that the inclination of the axis of the stirring blade at about 70 degrees or 80 degrees. The best angle 3 mixing blades are rotated to the upper exposed mud 20-30mm. 4 the relative position of two shafts with a stirring blade, the relative position of the paint to be shifted by 90 degrees. 5. installation must be tightened when mixing blades, stirring should be tight on the head of a nut on the blade. Suizhou concrete mixers | concrete mixers | Weifang Weifang Huaneng machinery provided by Huaneng machinery. Welcome to consult Weifang Institute Huaneng machinery and equipment (www.sdhnyjs.cn), be sure to specify when the contact is through the "Business Alliance members" see, thank you! Contact: Wang